Home Products & Services

3 Doors Tips from Someone With Experience

A Guide to Fixing of the Deadbolt on Your Door Rather than trusting the security of your home with the spring-loaded door knob, the deadbolts offers enhanced security. A deadbolt can only be initiated using a key from any side. It is not complicated if you need to place a deadbolt for your door. For most manufacturers, they have an installation guide that can help you. To get a clear picture of installing a deadbolt, read this article. Start by reading on the manufacturer’s instructions template. It has reference indicating points to marked on the door using an awl. It should be at least six inches above the door knob. The next thing is to drill a hole for the deadbolt. Use the manufacturers reference points to make the holes. The holes should be made using a hole saw.To avoid splinters, finish the hole from the other side of the door. Of your hole saw is not big enough to go through the breadth of the door use a standard bit to drill.
What I Can Teach You About Locks
The third step involves drilling a hole through the edge of the door. You need to use 11/2″ spade bit drill. Go on to mortise the area around the faceplate. A wood chisel should be used so that it will be flush with the door. The rounded corners will call for a smaller chisel.
A Brief Rundown of Deadbolts
Move on to fasten the bolt to the door. Mortising will be required until the faceplate fits right. Drill the pilot holes and secure the deadbolt to the door using screw. Installing of the cylinder and the thumb level follows. Start of fixing the exterior side and ensure that the writing is upright. Then move on the interior and tighten the screws with the mounting holes inside the lock. Fastening of the deadbolt should be done suing screws. With paint or lipstick, mark the tip of the bolt. Shut the door and severally turn the bolt to mark the door frame. Use a 7/8″ spade bit to make two holes overlapping the door frame for the deadbolt. Polish the space surrounding the holes such that the strike bolt will be flush with the door frame. Fasten the bolts using screws on the holes made. This done, your home will be under higher security than it would be on a standard spring loaded door knob.Alternative, you can seek expert services for the installation of the deadbolt for your door in case you find it tough. This will help you avoid costly mistakes which you can do on your own. .To make sure you get it right, keep your eye on the guide plus the manufacturer’s template.